2.0+ main board (4 pins each socket)



2.0+ has 4 wire motors..  

2.0″speed edition” has 3. Please make sure you order correct

Replace the board if:

No red light on the board, or Flickering LEDs (battery connector has been pulled loose)

To replace:

    1. Unplug the motors, remember their exact positions.
    2. Each motor has a corresponding corner socket
    3. Loosen the screws, slide out the motor arms.
    4. Remove board. Remember the exact position of battery compartment. Do not lose the screws or the rubber mounts!
Categories: ,